The Chrysler Minivan Fan Club Forums banner

tips on doing valve cover gaskets on 94 3.3

1K views 2 replies 3 participants last post by  Caraman99 
#1 ·
I know the plenum needs to come off along with the alternator....any helpful tips on doing this job?
 
#2 ·
Its pretty forward once the intake is off.
The EGR tube connection on the underside of the intake is the hardest part IMO.
 
#3 ·
I've always used simple muffler cement to re-connect/seal the EGR, (no gasket). It's usually cured enough by the time everything is back together and ready to start.

Seems to work for me.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top