How to Replace Turn Signal Indicator Bulb on 1998 Plymouth Grand Voyager SE 3.0 V6



ChryslerMiniVan.net is the premier Chrysler Minivan Forum on the internet. Registered Users do not see the above ads.
+ Reply to Thread
Results 1 to 6 of 6

Thread: How to Replace Turn Signal Indicator Bulb on 1998 Plymouth Grand Voyager SE 3.0 V6

  1. #1
    Join Date
    Mar 2009
    Location
    central Texas
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts


    How to Replace Turn Signal Indicator Bulb on 1998 Plymouth Grand Voyager SE 3.0 V6

    How do I replace the turn signal indicator bulb on my 1998 Plymouth Grand Voyager SE 3.0 V6? Specifically, how do I get to the bulb to replace it? Do I have to remove the dash?

    Thanks.

  2. Remove Advertisements
    Chrysler Minivan Forums
    Advertisements
     

  3. #2
    Join Date
    Aug 2008
    Posts
    296
    Thanks
    1
    Thanked 3 Times in 2 Posts


    From under the front wheel housing,remove the access cover behind the parking/turn signal light,see the pics here.Turn the bulb holder counterclockwise one quater turn and pull it out of the housing.Pull the socket out of the holder and pull the bulb out
    Attached Images

  4. #3
    Join Date
    Mar 2009
    Location
    Plover, WI
    Posts
    191
    Thanks
    0
    Thanked 0 Times in 0 Posts


    Quote Originally Posted by xitrum08 View Post
    From under the front wheel housing,remove the access cover behind the parking/turn signal light,see the pics here.Turn the bulb holder counterclockwise one quater turn and pull it out of the housing.Pull the socket out of the holder and pull the bulb out
    wrong bulb, he's asking about the bulb for the interior indicator. just pop off the top speaker/defrost panel you you'll see what's for the bulb access. you need to remove the A-pillar trim too. all that stuff is just snap together.

  5. #4
    Join Date
    Aug 2008
    Posts
    296
    Thanks
    1
    Thanked 3 Times in 2 Posts


    sorry misunderstood

  6. #5
    Join Date
    Nov 2008
    Posts
    166
    Thanks
    1
    Thanked 3 Times in 3 Posts


    Quote Originally Posted by 22dodge View Post
    wrong bulb, he's asking about the bulb for the interior indicator. just pop off the top speaker/defrost panel you you'll see what's for the bulb access. you need to remove the A-pillar trim too. all that stuff is just snap together.
    though be careful removing the A-pillars. I have known many people who simply yanked on them rather than using a bit of finesse. Then they had to find what kind of glue works on the plastic to piece them back together.

  7. #6
    Join Date
    Mar 2009
    Location
    Plover, WI
    Posts
    191
    Thanks
    0
    Thanked 0 Times in 0 Posts


    Quote Originally Posted by k9sar View Post
    though be careful removing the A-pillars. I have known many people who simply yanked on them rather than using a bit of finesse. Then they had to find what kind of glue works on the plastic to piece them back together.
    usually what i see it guys pull of the a pillar no problem however the metal clip stays in the hole.. to install the clip must be on the plastic tab. so make sure you get the clip out of the hole and push them on the plastic tab prior to installation. if you brake your trim, lmk, I have every color of them in stock.

+ Reply to Thread

Quick Reply Quick Reply

Similar Threads

  1. Changing Left Rear Turn Signal Bulb?
    By steve12 in forum 5th. Generation Chrysler Minivans: 2008 And Up
    Replies: 12
    Last Post: 03-29-2012, 11:53 PM
  2. 1998 Plymouth Grand Voyager Code
    By expresso in forum 3rd Generation Chrysler Minivans: 1996-2000
    Replies: 1
    Last Post: 10-23-2008, 12:46 AM

Bookmarks

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts