The Chrysler Minivan Fan Club Forums banner

How to disable factory security system?

26K views 2 replies 3 participants last post by  travial 
#1 ·
:hi2: Hi everybody, For my birthday my wife gave me a new aftermarket alarm with remote starter, nice now that is getting colder by the minute, so i installed everything was nice until I found out that when I start the 1998 Town & Country LXI with my remote starter the facory alarm goes off I kill my other alarm, :help_wsigHow can I disable completly my factory alarm ( I have the factory alarm with 3 buttons : lock, unlock and panic), Thank You guys very much!
 
#3 ·
Factory alarm disarm resources

I've been researching this issue for a while, and thought I'd throw in my 2 cents. I installed a remote start (avital 4113) in my T&C, but it set off the car alarm when the doors were locked, and the info was scarce about bypassing it. Here are a couple resources I found relevant to disarming the factory alarm, and which might help people dealing with alarm issues for this car in general.

Good info about wiring a remote start and disarming the factory alarm with the remote start:
http://www.justanswer.com/chrysler/4prkh-chrysler-town-country-lx-disable-factory.html

Good factory wiring diagram for 1996-2000 minivans: http://alarmsellout.com/support/diagrams/vehicle/CHRYSLER TOWN AND COUNTRY 1989-2005.pdf

This guys advice to disable the factory alarm seems questionable, but worth a try:
http://www.justanswer.com/chrysler/...system-cant-find-a-fuse-relay-disconnect.html
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top