door panel removal on 2008 town and country [Archive] - The Chrysler Minivan Fan Club Forums

: door panel removal on 2008 town and country



j2woods
03-03-2009, 11:46 AM
Would like to upgrade the speakers in the front doors. Does anyone have the door panel removal instructions.

Kevins
03-03-2009, 09:41 PM
See attached

Darth_Icarus
01-21-2010, 03:54 PM
Just as to not start a new thread...perhaps I'm an idiot, but how do you disengage the clips to pull the door panel off (it's a 2009)?

I'm trying to replace the passenger side mirror as I decided to attack the garage while backing out & the door frame won. I have the replacement mirror & instructions but I figured the easiest part would be taking the panel off...apparently notsomuch, at least to me.

Any tips for how to get this thing off? (I have the 2 screws out at least :p )

kuvasz2
06-29-2011, 06:39 PM
What the ****. Corrupted file!

gsmagnum
07-03-2011, 10:48 AM
Corrupted file!

The PDF opened just fine for me. It doesn't appear corrupted.

dun4now
07-03-2011, 04:27 PM
The PDF opened just fine for me. It doesn't appear corrupted.
Me either, a window pops up and says its corupted or invalid.

KOG
07-10-2011, 07:55 PM
Opens for me too, no problem.

ninnydee
10-29-2011, 02:38 PM
The file is good. No problem for me. I need to replace the door latch.

Sunvanse
10-29-2011, 05:53 PM
FWIW, won't open for me either, "invalid or corrupt file"

ninnydee
10-30-2011, 12:54 PM
Try the file attached. It's the same as Kevins provided. I was also wondering what's the proper way to disengage the door panel clips. Can I use a rigid putt knife peel around the plastic panel, or I need some special tools? Any suggesiton will be appreciated.

dun4now
10-30-2011, 03:13 PM
try the file attached. It's the same as kevins provided. I was also wondering what's the proper way to disengage the door panel clips. Can i use a rigid putt knife peel around the plastic panel, or i need some special tools? Any suggesiton will be appreciated.

nope!!!

Dangermouse
11-01-2011, 09:20 AM
If it is for the christmas tree type retainers, one of these is useful

http://ww2.justanswer.com/uploads/s420/2011-03-10_213616_door_panel_removal_tool.jpg

dun4now
11-01-2011, 06:40 PM
Now that's a picture.:Wow1:

sideburns2009
11-02-2011, 02:11 AM
Courtesy of the orignal poster's PDF and my screenshots of it:

http://i42.tinypic.com/201a4k.png

http://i43.tinypic.com/2n092sh.png

http://i40.tinypic.com/15xv6tx.png

Dangermouse
11-03-2011, 03:11 PM
Now that's a picture.:Wow1:

Go big or go home ;)

gittyup87
12-11-2011, 05:31 PM
I had no problem removing door panel. Anyone have diagram for removing the inner panel to access the window.

suarezg
05-24-2012, 10:16 PM
Won't open for me either. It says exactly what the other person said....file may be corrupted, encrypted or not in the right format to open. Bummer....

Nbasuperfreak
08-30-2012, 09:45 AM
I am trying to remove the panel for the rear sliding door. Any help on this? The diagrams for the front door don't help much.

decent1
10-18-2014, 10:03 AM
Please help: I know this post is dated, but the unanswered question on how to "disengage the door panel clips" remains unanswered. Disengaging the clips is my problem.
NOTE: The files have all been OK. None of the files have been corrupted, as confirmed by Norton Antivirus protection.